THOMSON SPEEDTOUCH 605S, Setup And User Manual

Page: 71 / 74

6 Troubleshooting
E-SIT-CTC-20030605-0003 v1.0
67
6.2 SpeedTouch™ Default Configuration
Reset to default
configuration
Proceed as follows to perform a hardware reset to factory defaults:
1 Make sure the SpeedTouch™ is powered on.
2 Use a pencil to press the Defaults button at the back of the SpeedTouch™ until all
the LEDs on the front panel start flashing.
3 Release the button. The SpeedTouch™ reboots and will come online again with
factory defaults.
User configuration
profile
When you reset the SpeedTouch™ to its factory defaults, all the configuration profile
settings you might have changed will be deleted. It may be necessary to:
•
reconfigure the system by using the SpeedTouch™ Setup wizard
or
•
upload the relevant configuration file. See “1.3 SpeedTouch™ Configuration
Setup” on page 7 for more information.
Defaults button