THOMSON SPEEDTOUCH 605S, Setup And User Manual

Page: 15 / 74

1 SpeedTouch™ Installation
E-SIT-CTC-20030605-0003 v1.0
11
8 The Setup wizard should find your SpeedTouch™ device on the local network.
This is indicated by the following window:
In case more than one SpeedTouch™ device is found, a listing is provided from
which you can select your SpeedTouch™.
Note If the Setup wizard does not find any SpeedTouch™ on the network an
error window pops up. In this case check:
•
Whether the SpeedTouch™ is turned on and fully initialized.
• Whether your PC is correctly connected to the SpeedTouch™
and has a valid IP address (i.e. any IP address but 0.0.0.0).
• Whether no dedicated firewall device or router is placed
between your PC and the SpeedTouch™ and whether no
personal firewall software is running on your PC.
To repeat the search for the SpeedTouch™, click
Back
and proceed
with step 7 of this procedure.
9 To continue with the configuration of your SpeedTouch™ and your PC, proceed
with the configuration procedure described below.