THOMSON SPEEDTOUCH 605S, Setup And User Manual

Page: 49 / 74

3 SpeedTouch™ Web Interface
E-SIT-CTC-20030605-0003 v1.0
45
Under Properties you can select:
•
DHCP server:
To enable the SpeedTouch™ DHCP server. In addition, select the
appropriate Auto DHCP
• Auto DHCP (default):
The SpeedTouch™ will not start its DHCP server immediately, but will
first probe the network for a possible concurrent DHCP server for
some period of time (set by Client timeout in seconds). In case
another DHCP server is found, the SpeedTouch™ DHCP server is not
started, and a DHCP client will be created on its Ethernet interface
instead. If no concurrent DHCP server is found, the SpeedTouch™
DHCP server is started.
•
No DHCP
To disable the SpeedTouch™ DHCP server. If it was running, it will be
stopped immediately.
•
Click the Server Leases tab to view the current leases provided by the
SpeedTouch™ DHCP server.
If needed, you can also manually add static DHCP leases for specific hosts or
make dynamically assigned leases static by clicking
Lock
.
• Click the Address Pools tab to view the SpeedTouch™ DHCP server lease
pool:
The SpeedTouch™ DHCP server (if enabled) will use the address pools
listed in this table to provide IP addresses to requesting DHCP clients. If
needed, you can add/delete DHCP address pools manually.