THOMSON Speedtouch 600 Series, Orientation Manual

Page: 67 / 78

4 SpeedTouch™610 Advanced Concepts
E-SIT-CTC-20030306-0004 v2.0
63
Semi-graphical CLI
To use the semi-graphical Command Line Interface, execute 'menu' from the prompt:
The semi-graphical CLI offers you an attractive and easy-to-use configuration environ-
ment for the CLI.
You can browse through the CLI command groups via the arrow keys. Pressing Enter
executes your selection. From each level you can execute '..' to go one level up.
Use the Tab key to change from the CLI command menu to the control menu and vice
versa.
To setup a CLI command, simply press Enter on its name. You can configure and over-
view its various parameters at one time. In case the parameter provides preset values,
you can go through these via the arrow keys.. If you are satisfied, use the Tab key to go
to the 'OK' field and press Enter.
Note Do not forget to save your changes by executing 'saveall' (from any CLI
prompt).
CLI Reference Guide
For a complete description of the SpeedTouch™610 Command Line Interface, see the
“SpeedTouch™610 CLI Reference Guide”.