THOMSON Speedtouch 600 Series Orientation Manual Download Page 54

Page: 54 / 78

3 The SpeedTouch™610 Web Interface

E-SIT-CTC-20030306-0004 v2.0

SIP

Click this link to display the Session Initiation Protocol (SIP) Proxy Server page.
This page allows you to view/configure

The SpeedTouch™610's integrated SIP multimedia PBX web page offers five tabs,
allowing you to:

•

Configure the general SIP Settings of the SpeedTouch™610's SIP PBX.

•

Overview and add/delete SIP Users allowed to be involved in SIP communications.

•

Overview the Location Information for SIP users (i.e. Contact IP address).

•

Overview Call information.

•

Create outgoing and incoming Black Lists for users.

Note

To use the SIP features of the SpeedTouch™610, the SIP software key must
be enabled. See Add-On for more information.

For more information, see the application note “The SpeedTouch™ SIP multi-media
PBX”.

Summary of Contents for Speedtouch 600 Series














































































Search results

Summary of Contents for Speedtouch 600 Series

Reviews:

Related manuals for Speedtouch 600 Series

Brands by name

Popular brands

THOMSON Speedtouch 600 Series, Orientation Manual

Search results

Summary of Contents for Speedtouch 600 Series

Reviews:

Related manuals for Speedtouch 600 Series

Brands by name

Popular brands