THOMSON Speedtouch 600 Series, Orientation Manual

Page: 51 / 78

3 The SpeedTouch™610 Web Interface
E-SIT-CTC-20030306-0004 v2.0
47
3.5 LAN Services Tasks Links
DHCP
Click this link to display the Dynamic Host Configuration Protocol (DHCP) page.
In this page you can:
•
Click the DHCP Server tab to access the DHCP server pages. This page is subdi-
vided into three parts:
• Click the Server Config tab to enable/disable the SpeedTouch™610
(Auto)DHCP server:
Under Properties you can select:
•
DHCP server
To enable the SpeedTouch™610 DHCP server. In addition, select the
appropriate Auto DHCP
• Auto DHCP
The SpeedTouch™610 will not start its DHCP server immediately, but
will first probe the network for a possible concurrent DHCP server
for some period of time (set by Client timeout in seconds). In case
another DHCP server is found, the SpeedTouch™610 DHCP server is
not started, and a DHCP client will be created on its Ethernet inter-
face instead. If no concurrent DHCP server is found, the Speed-
Touch™610 DHCP server is started.
•
No DHCP
To disable the SpeedTouch™610 DHCP server. If it was running, it will
be stopped immediately.
• Click the Server Leases tab to view the current leases provided by the
SpeedTouch™610 DHCP server:
If needed, you can also manually add static DHCP leases for specific hosts or
make dynamically assigned leases static by clicking Lock.