THOMSON SpeedTouch 585, Reference Manual

Page: 513 / 682

PPP Commands
E-DOC-CTC-20050531-0058 v1.0
493
ppp ifadd
Create a new PPP interface.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
ppp ifadd intf = <string>
intf The name for the new PPP interface.
Note
If not specified, the destination parameter must be specified. In this case the
name of the destination will double as interface name.
REQUIRED
=>ppp iflist
Internet: dest : RELAY
[00:00:00]
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd demanddial
dns metric = 0
mru = 1492 Tx inactivity = 1200s left = 0s
auth = auto user = password =
admin state = down oper state = down link state = not-connected
LCP : state = initial retransm = 10 term. reason =
IPCP: state = initial retransm = 0 term. reason =
acname : --- service : ---
=>ppp ifadd intf=Rt_PPPoA
=>ppp iflist
Internet: dest : RELAY
[00:00:00]
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd demanddial
dns metric = 0
mru = 1492 Tx inactivity = 1200s left = 0s
auth = auto user = password =
admin state = down oper state = down link state = not-connected
LCP : state = initial retransm = 10 term. reason =
IPCP: state = initial retransm = 0 term. reason =
acname : --- service : ---
Rt_PPPoA: dest : [00:00:00]
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd
dns metric = 0
mru = 1500
auth = auto user = password =
admin state = down oper state = down link state = not-connected
LCP : state = initial retransm = 10 term. reason =
IPCP: state = initial retransm = 0 term. reason =
=>
ppp ifdelete Delete a PPP interface.
ppp iflist Display the PPP interfaces.