THOMSON SpeedTouch 585, Reference Manual

Page: 416 / 682

IP Commands
E-DOC-CTC-20050531-0058 v1.0
396
ip ipconfig
Modify an IP address configuration.
SYNTAX:
where:
EXAMPLE:
ip ipconfig addr = <ip-address>
[preferred = <{disabled | enabled}>]
[primary = <{disabled | enabled}>]
addr The IP address to be configured. REQUIRED
preferred Make this IP address the preferred address for that subnet (enabled) or not
(disabled).
The default is
disabled .
OPTIONAL
primary Make this IP address the primary address for the interface (enabled) or not (disabled).
The default is
disabled .
OPTIONAL
=>ip iplist
Interface
Type IP-address Point-to-point/Mask
1 eth0 Ethernet 10.0.0.138 255.255.255.0
1 eth0 Ethernet 169.254.141.11 255.255.0.0
0 loop Ethernet 127.0.0.1 255.0.0.0
=>ip ipconfig addr=169.254.141.11 preferred=enabled primary=enabled
=>ip iplist
Interface
Type IP-address Point-to-point/Mask
1 eth0 Ethernet 10.0.0.138 255.255.255.0
1 eth0 Ethernet *169.254.141.11 255.255.0.0
0 loop Ethernet 127.0.0.1 255.0.0.0
=>
The preferred IP address is marked with “*” in the list.