manualshive.com logo in svg

THOMSON SpeedTouch 585, Reference Manual, Page: 517 / 682

Share
Download
THOMSON SpeedTouch 585 Reference Manual Download Page 517

PPP Commands

E-DOC-CTC-20050531-0058 v1.0

497

echo

Send LCP echo requests at regular intervals (enabled) or not (disabled).
The default is 

disabled

.

OPTIONAL

mru

A number between 293 and 8192.
Represents the maximum packet size the SpeedTouch™ should negotiate to be 
able to receive.
The default is 

1492

.

OPTIONAL

laddr

The local IP address of the peer-to-peer connection.
Specifying a local IP address forces the remote side of the PPP link (if it allows to) 
to accept this IP address as the SpeedTouch™ PPP session IP address. 
If not specified, the SpeedTouch™ will accept any IP address.
Typically the local IP address parameter is not specified.

OPTIONAL

raddr

The remote IP address of the peer-to-peer connection.
Specifying a remote IP address forces the remote side of the PPP link (if it allows 
to) to accept this IP address as its PPP session IP address.
If not specified, the SpeedTouch™ will accept any IP address.
Typically the remote IP address parameter is not specified.

OPTIONAL

netmask

The subnetmask associated with this address.
Specifying a subnetmask forces the remote side (if it allows to) to accept this 
subnetmask as the PPP session subnetmask.
If not specified, the SpeedTouch™ will accept any subnetmask.
The SpeedTouch™ will only request/accept a subnetmask if a DHCP server pool 
is associated, in other words, if the [pool] parameter is specified.

OPTIONAL

format

The negotiated subnetmask specified in the netmask parameter is specified in 
the dotted format (dotted) or in Classless Inter Domain Routing (CIDR) format 
(cidr).
The default is 

cidr

.

OPTIONAL

pool

The name of the free DHCP server pool to which the acquired IP subnet must be 
assigned.

OPTIONAL

savepwd

Save password (enabled), if supplied, or do not save the password (disabled).
The default is 

disabled

.

OPTIONAL

demanddial

Enable or disable the dial-on-demand feature.
The default is 

disabled

.

OPTIONAL

doddelay

A number between 0 and 3600 (seconds).
During this initial interval,  packets do not trigger the PPP interface.

OPTIONAL

primdns

The IP address of the primary DNS server.
In case a primary DNS server is specified, the SpeedTouch™ will negotiate this IP 
address with the remote side.

Note

If not specified, the SpeedTouch™ will accept any IP address.

OPTIONAL

secdns

The IP address of the (optional) secondary DNS server.
In case a secondary DNS server is specified, the SpeedTouch™ will negotiate this 
IP address with the remote side.

Note

If not specified, the SpeedTouch™ will accept any IP address.

OPTIONAL

dnsmetric

A number between 1 and 100.
Represents the DNS route metric to be used for the negotiated DNS servers.
The default is 

1

.

OPTIONAL

idletime

A number between 0 and 1000000 (seconds).
Represents the maximum time the link may be idle.
The default is 

0

.

OPTIONAL

Summary of Contents for SpeedTouch 585











































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments