THOMSON SpeedTouch 585, Reference Manual

Page: 151 / 682

DHCP Commands
E-DOC-CTC-20050531-0058 v1.0
131
dhcp server lease add
Add a DHCP server lease.
SYNTAX:
where:
EXAMPLE:
dhcp server lease add clientid = <client-id>
pool = <string>
[addr = <ip-address>]
[offset = <number>]
[leasetime = <number>]
[expirytime = <number>]
[gateway = <ip-address>]
[macaddr = <hardware-address>]
clientid The DHCP client identification string of the booting host. REQUIRED
pool The name of the DHCP server pool from which the DHCP lease should be taken.
Tip
Use the command
:dhcp server pool list
to obtain a list of avail-
able DHCP server pools.
REQUIRED
addr The favoured IP address for this DHCP host.
This IP address, if specified, must be in the range of the specified DHCP server
pool. OPTIONAL
offset A number between 0 and the integer number defined by the number of available IP
addresses in the DHCP server pool.
Represents the IP address offset in the DHCP server pool preserved for this host.
Note
Not specifying this parameter does not preserve an IP address for the
host.
OPTIONAL
leasetime A number (of seconds).
Represents the time the host is allowed to use this address.
Note
0 means infinite leasetime.
OPTIONAL
expiretime The time in seconds the DHCP server keeps the lease reserved
Tip
0 means infinite expirytime.
gateway The IP address of the default router for this client. OPTIONAL
macaddr The MAC address of the host. OPTIONAL
=>dhcp server lease list
Lease
Pool TTL State Clientid
0 0.0.0.0 dhcp_pool_1 00:26:40 FREE 00:90:D0:12:34:56
=>dhcp server lease add clientid=01:23:55:67:89:ab pool=Local_pool leasetime=3600
=>dhcp server lease list
Lease
Pool TTL State Clientid
0 0.0.0.0 dhcp_pool_1 00:26:40 FREE 00:90:D0:12:34:56
1 10.0.0.1 local_pool 00:59:22 USED 01:23:45:67:89:AB
=>