THOMSON SpeedTouch 585, Reference Manual

Page: 297 / 682

Eth Commands
E-DOC-CTC-20050531-0058 v1.0
277
eth bridge ifconfig
Modify a bridge interface configuration.
SYNTAX:
where:
EXAMPLE:
eth bridge ifconfig intf = <string>
[dest = <string>]
[portstate = <{disabled | learning | forwarding}>]
[retry = <number{0-65535}>]
[prioconfig = <{disabled|overwrite|increase}>]
[mcastfilter = <{disabled|enabled}>]
intf The name of the bridge interface to be configured. REQUIRED
dest The destination for this interface.
Typically an ATM or a physical interface name. OPTIONAL
portstate The bridge portstate for this interface.
Choose between:
disabled
learning
forwarding.
The default is forwarding .
OPTIONAL
retry A number between 0 and 65535.
Represents the number of times the SpeedTouch™ retries to set up a WAN
connection before giving up.
The default is
10 .
OPTIONAL
prioconfig The priority configuration for this interface. OPTIONAL
mcastfilter Enable or disable the discard of multicast packets on this port
The default is
disabled .
OPTIONAL
=>eth bridge iflist
OBC
: dest : Internal
...
...
BrEthoA_br: dest : (none)
Connection State: not-connected Retry: 10
Port: (Unassigned) PortNr: (Unknown) PortState: forwarding
=>eth bridge ifconfig intf=BrEthoA_br dest=BrEthhoA_atm
=>eth bridge iflist
OBC
: dest : Internal
...
...
BrEthoA_br: dest : BrEthhoA_atm
Connection State: not-connected Retry: 10
Port: (Unassigned) PortNr: (Unknown) PortState: forwarding
=>