TAKING C
ONTROL
REMO
TE C
ONTROL
68 USING Sky+HD
If the setup didn’t work
If you followed the setup carefully but can’t see
TV Guide
at the end of it, follow these simple steps:
1 Check and make a note of which TV channel you use for watching Sky digital TV.
2 Press
tv
on your remote control.
3 Hold down
select
and the
green
button together until the red light on your remote control blinks twice (this is after about 2
seconds).
4 Key in the number your TV uses for watching Sky digital TV and press
select
.
The red light blinks, meaning the remote control settings are made properly.
Alternative setup
If your TV’s brand isn’t listed on page 67, you can try an alternative setup. This involves programming your remote control to the TV’s
specific model code instead of the brand code, as follows:
1 First, you need to check the model code for your TV; Press
interactive
, press
down
then select
Sky Customer Service
.
Select
Programme Your Remote
and follow the relevant options until you get to the model code for your model number.
Make a note of the code.
2 Point the remote control away from the TV and Sky+HD box and press the
tv
button.
3 Press and hold the
select
and
red
buttons together until the red light blinks twice.
4 Enter the model code. If it’s a 3-digit number, press
select
after the model code.
5 Press
Sky
to complete the setup.
6 Now check the settings; point the remote control at the Sky+HD box and press
tv
then number
3
.
You should now be able to see a terrestrial TV channel.
If you have tried these options and still can’t use your Sky+HD remote control with your TV, call Sky Customer Service on the number
provided in the
Terms & Conditions
document you received with your Sky+HD box.
Summary of Contents for Sky+HD DSI8215
Page 91: ...91...
