www.thomsonsecurity.eu
13
EN
EN
MOTORISED 720P HD WIFI IP CAMERA
D - CONFIGURATION AND USE
11
14
12
13
10
5
3
6
9
2
1
4
7 8
1
Camera UID (unique code shown on the
camera)
2
Camera user name (default is "admin")
3
Type of device: Select "THOMSON IPC"
4
Name under which the camera will appear
in
the software (according to your preference)
5
P2P connection: tick to add
a camera using
its UID. The UID of each camera is a unique
code of 20 to 24 numbers and letters, shown
directly on the camera.
6
Current camera IP address
7
Camera password (none by default; leave
blank)
8
Test button for information entered:
enables you to check the connection, user
name and password entered
9
Current MAC address of the camera
10
Camera connection
port (default 88)
11
Information related to the camera that you
are in the process of adding
12
Button that adds the camera with the
information shown at the top of the window
13
Results of a camera search on the
network
connected to the computer
14
Search button: searches for cameras on the
network to which the computer is connected
Carry out the following steps to easily connect your
camera:
• Check the "
Connexion P2P [P2P connection]
"
box.
• Click the "
Recherche [Search]
" button to fi nd
your camera on the network to which your
computer is connected.
• In the list of cameras found, click on the
one you wish to add to the software. The
information in the top part of the window
is fi lled in automatically when you select a
camera from the list.
• If necessary, change the
user name and
password
used to connect to the camera (the
default user name is "admin" and the password
must be left blank).
• Click on "Vérifi cation de la connexion [Check
connection]
" to check the camera connection
and data entered.
• Finally, click on "
Ajouter" [Add].
When you connect your camera for the fi rst time,
you are immediately asked to change the user
name and password for camera connection, for
increased security:
Once you have modifi ed the user name and
password, the camera appears on the list on the
right side of the software's main screen. Drag the
line of your camera into one of the viewing windows
to display the image:
