31
4.10 ELECTRICAL
The Mini-Skid Loader is equipped with a 12 volt,
negative ground electrical system. All electrical
service items can be accessed through the service
access panel on rear of machine. See Fig 4.10A.
All fuses, relays and circuit breakers terminate to
this point.
#7
4. MAINTENANCE
RELAYS AND FUSES (Fig. 4.10)
1.
Safety Latching Relay
2.
Alternate Latching Relay
3.
First Alternating Relay
4.
Second Alternating Relay
5.
Glow Plug Relay
6.
Fuse Panel
A.
Work Lamp, Access. Plug, Tilt Plug
B.
Hourmeter, Fuel Solenoid
C.
Low Oil Pressure Lamp
D.
Alternator “IGN”
E.
Safety Interlock
F.
Combiner Valves
G.
Brake
H.
Option
7.
40 Amp Circuit Breaker
Fig. 4.10
BATTERY
C4164
BOOSTING PROCEDURES
The ignition must be in the OFF position. The
booster battery to be used must be 12 volt. Connect
the end of the first cable to the positive (+) terminal
of the booster battery. Connect the other end of the
same cable to the Mini-Skid Loader battery positive
(+) terminal (See fig. 4.10B). Connect the end of
the second cable to the negative (–) terminal of the
booster battery. Connect the other end of the same
cable to a ground. Keep cables away from moving
parts. Start the engine. After the engine has started,
disconnect the end of the second cable from the
negative (–) terminal of the booster battery.
Disconnect the other end of the same cable from the
ground. Disconnect the end of the first cable from
the positive (+) terminal of the booster battery.
Disconnect the other end of the same cable from the
Mini-Skid Loader battery positive (+) terminal.
SERVICE ACCESS
PANEL
ELECTRICAL PANEL
Fig. 4.10A
Fig. 4.10B
+
_
https://www.tractormanualpdf.info/
