20
3. OPERATION
Fig. 3.5
C4774
3.4 FILLING FROM A PILE
1.
Push the Lift and Tilt Joystick forward and
lower the lift arms completely down. Push the
Lift and Tilt Joystick right and place the cutting
edge of the bucket on the ground. See Fig.3.4.
2.
Drive the loader forward slowly. See Fig. 3.4A.
As the bucket begins to fill push the Lift and
Tilt Joystick to the left to raise the front of the
bucket and pull back on the Lift and Tilt
Joystick to raise the lift arms. When the bucket
is full back away from the pile. See Fig 3.4B.
3.
To dump the bucket pull back on the Lift and
Tilt Joystick to raise the lift arms. Push the Lift
and Tilt Joystick left small amounts as the lift
arms are raising to stop material from falling off
the back of the bucket. When the bucket is at
the correct height for dumping, push the Lift
and Tilt Joystick to the right to empty the
bucket.
Use extreme caution
when stopping. If the
bucket or attachment is
raised, the machine can
tip. Keep all movements
smooth and general
when maneuvering with
lift arms raised. All new
operators must work the
machine in a safe open
area to become familiar
with its operating
characteristic.
WARNING
To ensure safe
operation, never leave
the operator’s platform
without lowering the lift
arms to the ground. Do
not load over the rated
capacity
WARNING
3.5 DIGGING WITH A BUCKET
1.
Lower lift arms fully and tilt bucket forward
until cutting edge is on the ground.
2.
Drive machine forward slowly and continue to
tilt bucket forward until it enters the ground to
desired depth and then tilt it back a small
amount to keep an even depth (Fig. 3.5).
3.
Continue driving forward until bucket is full
and then tilt bucket fully back while driving
slowly forward or stopping the machine.
Fig. 3.4A
C4772
Fig. 3.4B
C4773
Fig. 3.4
C4196
https://www.tractormanualpdf.info/
