thomann STAIRVILLE LED PAR56 24x3W RGB MKII, User Manual

Page: 31 / 48

Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘TEST’ . Press [OK] .
Press one of the arrow buttons repeatedly until the display shows ‘REd’ , ‘GREE’ , ‘bLUE’ or
‘STRO’ . Press [OK] . Now you can separately set the brightness of the LEDs for each colours red,
green and blue in a range from 0 to 255, or select the strobe rate from a range of 0 to 255.
This mode is also suitable to mix constant or flashing light from the three LED colours without
DMX control.
When the display shows the desired value, press
[OK] to confirm the selection and then [M] to
return to the parent menu. To return to the parent menu without making changes, press [M] .
Manual test
Operating
LED PAR56 24×3W RGB MKII LED PAR64 36×3W RGB MKII
31