thomann STAIRVILLE LED PAR56 24x3W RGB MKII, User Manual

Page: 27 / 48

Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘AddR’ . Press [OK] .
Now you can set the number of the first DMX channel to be used by the device (DMX address).
Use the arrow buttons to select a value between 1 and 512 (display shows ‘A001’ … ‘A512’ ).
When the display shows the desired value, press [OK] to confirm the selection and then [M] to
return to the parent menu. To return to the parent menu without making changes, press [M] .
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible DMX address for the various DMX modes
Mode Highest possible DMX address
3-channel 510
5-channel 508
DMX address
Operating
LED PAR56 24×3W RGB MKII LED PAR64 36×3W RGB MKII
27