thomann STAIRVILLE LED PAR56 24x3W RGB MKII, User Manual

Page: 30 / 48

Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘MIX’ . Press [OK] .
Now you can select one of the preprogrammed automatic shows. Use the arrow buttons to
select a value for the progress speed between 0 and 255. (Display shows ‘M000’ … ‘M255’ ).
The auto show can only be activated on the master device.
This setting is only relevant if the device is not controlled via DMX. The device can operate in
stand-alone mode or control connected devices of the same type, that must be configured as
slaves. When the display shows the desired value, press [OK] to confirm the selection and then
[M] to return to the parent menu. To return to the parent menu without making changes, press
[M] .
Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘SOUd’ . Press [OK]
and use the arrow buttons to select the option ‘ON’ to enable sound control. The device now
shows an automatic colour change in the rhythm of the music when operating mode ‘Show 1’
is active.
Open the
‘SOUd’ menu again to disable sound control. Confirm with [OK] and use the arrow
buttons to select the option ‘OFF’ .
This setting is only relevant if the device is not controlled via DMX. Press [M] to return to the
parent menu.
Operating mode ‘Show 2’
Sound control
Operating
LED-PAR
30