thomann STAIRVILLE DMX-Master I, User Manual

Page: 45 / 68

8.5 Assigning / reversing DMX channels.
1.
Enabling programming mode.
2.
Press [FINE] and [MODE] simultaneously twice. Then the [ASSIGN] LED lights up and indi‐
cates that the ASSIGN mode is active.
3.
Use [BANK UP/DOWN] to toggle between Pan and Tilt. The corresponding LED indicates
your selection.
4.
Select the desired scanner.
5.
Press [TAP/DISPLAY] to toggle between 8-channel and 16-channel mode. The display
shows either ‘ASSXX XX | X/Y 08CH’ or ‘ASSXX XX | X/Y 16CH’ .
6.
If necessary, you can use [PAGE SELECT] to toggle between the two levels, Page A and
Page B.
7.
While holding down [MODE] , press [SCENES] . All LEDs should flash briefly and thus indi‐
cating that the DMX channel has been assigned. The [SCENES] button 1 stands for DMX
channel 1, [SCENES] button 2 for DMX channel 2 and so on.
8.
Repeat steps 3 - 7.
Assigning DMX channel
Operating
DMX-Master I, DMX-Master MK II ENC
45