thomann STAIRVILLE DMX-Master I, User Manual

Page: 36 / 68

9.
Once programming is complete, press [PROGRAM] for three seconds. The [PROGRAM]
LED goes out and indicates that you have exited the programming mode.
Example: Programme scanner 1 with eight scenes in which channels 1 - 8 are successively set
to 100 %. Save the scenes in bank 3.
1.
Enabling programming mode.
2.
Press [SCANNERS] 1 to turn on its fader control.
3.
Press [PAGE SELECT] to select Page A.
4.
Slide fader 1 all the way up.
5.
Press [MIDI/REC] .
6.
Select bank 3 using the [BANK UP/DOWN] buttons.
7.
Press [SCENES] 1.
8.
Repeat steps 4 - 7 until all eight scenes are stored in bank 3.
9.
Press [SCANNERS] 1 again to disable the scanner.
10. Press
[PROGRAM] for three seconds to exit programming mode.
Operating
DMX controller
36