thomann STAIRVILLE DMX-Master I, User Manual

Page: 48 / 68

1.
With the unit off, press and hold the two buttons [TAP/DISPLAY] and [MODE] .
2.
Switch the device on again. Press [TAP/DISPLAY] to toggle between ‘Fade Time’ and
‘Assign Fade Time’. The display either shows ‘ALL CH| FD TIME’ or ‘ONLY X/Y|FD TIME’ .
3.
Press [TAP/DISPLAY] and [MODE] simultaneously to save the settings. In case you do not
want to save, press [BLACKOUT] to exit the mode.
1.
Activate the Assign or Reverse mode (see Ä ‘Assigning DMX channel’ on page 45 and
Ä ‘Reversing channels’ on page 47 ).
2. Use one of the [SCANNERS] buttons to select the scanner you want to delete.
3.
Press [AUTO/DEL] and [MODE] simultaneously. All LEDs will flash briefly to confirm the
deleting.
Assigning Fade time
Deleting DMX settings of a
scanner
Operating
DMX controller
48