thomann STAIRVILLE DMX-Master I, User Manual

Page: 34 / 68

8 Operating
8.1 Introduction
With the DMX Master I or the DMX Master MK II ENC you can control up to twelve devices with
up to 16 DMX channels per device. 30 banks with each eight programmable scenes are avail‐
able as program memory. You can programme six chases, each with up to 240 programmed
scenes. Control is done via eight faders and further function buttons. With DMX Master MK II
ENC, you can very easily control pan and tilt of a scanner using two encoder wheels. To create
your very special light effect, you can assign or also invert DMX channels. In addition, two
devices can communicate with each other so that they can exchange files.
8.2 Enabling programming mode
As soon as you turn the unit on, the manual mode will be automatically activated. To enter the
programming mode, press the button [PROGRAM] for three seconds. The LED will start
flashing, indicating that you are now in programming mode.
Operating
DMX controller
34