thomann STAIRVILLE DMX-Master I, User Manual

Page: 50 / 68

1.
Switch off the device.
2.
Press and hold [SCANNERS] buttons 6 and 12 simultaneously while turning the device on
again. Then release the buttons.
3.
Press [SCANNERS] buttons 6 or 12 to move the cursor to the left or right.
4.
Press [Bank Up] or [Bank Down] to change the characters at the current position.
5.
Repeat steps 3 - 4. You can enter up to 16 characters in two rows.
6.
Press and hold [SCANNERS] buttons 6 and 12 simultaneously to save the new characters.
All LEDs will flash briefly, thus indicating the success of the procedure. In case you do not
want to save, press [BLACKOUT] to end this function.
Setting up a new logo
Operating
DMX controller
50