thomann LED-Commander 16/2, User Manual

Page: 31 / 48

1.
Keep the [PROGRAM
½
RECORD] button pressed for three seconds to change to the oper‐
ating mode Programming/Recording.
2. Press the [CHASE] buttons to select the desired chase that you want to expand. If
needed, toggle between both memory banks via the shift button.
3.
Briefly press the [MIDI
½
IN SET] button.
ð
The corresponding indicator LED flashes.
4.
If needed, press the and buttons to select the step number at which you want to
insert the program step.
5.
Press the [FIXTURE] buttons to select the channel that you want to programme.
6. Use the flash controls 1 to 8 to set the desired values.
7.
Press the [PROGRAM
½
RECORD] button to store the updated values.
ð
All indicator LEDs flash three times.
8.
Repeat steps 4 to 7 to insert further programme steps. The 16 memory slots can be
assigned to a total of 2,000 programme steps.
9.
Keep the button [PROGRAM
½
RECORD] pressed for three seconds to exit the recording
mode.
Inserting a programme step
Operation
LED-Commander 16/2
31