thomann LED-Commander 16/2, User Manual

Page: 30 / 48

1.
Keep the [PROGRAM
½
RECORD] button pressed for three seconds to change to the oper‐
ating mode Programming/Recording.
2. Press the [CHASE] buttons to select the desired chase. If needed, toggle between both
memory banks via the shift button.
ð
The corresponding CHASE LED lights up.
3. Press the [FIXTURE] buttons to select the channel that you want to programme.
4. Use the flash controls 1 to 8 to set the desired values.
5.
Press the [PROGRAM
½
RECORD] button to store the updated values.
ð
All device LEDs briefly flash and the display shows the following values:
6.
Repeat steps 2 to 5 to add further programme steps.
7.
Keep the button [PROGRAM
½
RECORD] pressed for three seconds to exit the recording
mode.
Programming chases
Operation
DMX-controller
30