thomann LED-Commander 16/2, User Manual

Page: 28 / 48

1.
Keep the button [PROGRAM
½
RECORD] pressed for three seconds to change to the oper‐
ating mode Programming/Recording.
2. Use the [FIXTURE] buttons to select the channel that you want to programme.
3.
Use the flash controls 1 to 8 to set the desired values.
4.
Press the [SCENE] button to select a memory slot. If needed, toggle between both
memory banks via the shift button.
5.
Press the [PROGRAM
½
RECORD] button and then for about one second the button for
the scene that you want to overwrite.
ð
All device LEDs briefly flash.
6.
Keep the button [PROGRAM
½
RECORD] pressed for three seconds to exit the recording
mode.
With each programming, the existing scenes are overwritten with the new data.
Programming scenes
Operation
DMX-controller
28