Page 24
No Doors
Not relevant for the ORBIS
Motor
Motor Stop
Motor Stop: 017%
Selection: 0% to 100%. The
value when the motor stops.
Auto On/Off
Speed Automatic On
Selction: On / Off
This is the selection
between operating mode A or
B (see chapter 3.1)
Speed minimum
Motor Start: 087%
Selection: 0% to 100%
Latency Time
Latency Time: 2s
Selection: 0s to 9s
Speed maximum
Motor Max: 087%
Do not change this
value. It corresponds to
100% full throttle for the Jeti
MEZON ( 1.900 ms )
Slow Function
Slow Function: 40%
40% -> 6 seconds
100% -> 12 seconds
Only relevant by acceleration.
Don’t go below 40%.
Init Controler
Init Controler: No
Selection: No / Yes
Back
Tow Release
Release Open
Release max 100%
Selection: 0% to 100%
Release Closed
Release min 0%
Selection: 0% to 100%
Back
Setup
Receiver
Adjust to RC: No
Selection: No / Yes
Monitor
RC Signal is displayed from
Input 'Empfänger KTW'
Reset all
No
Selection: No / Yes
If you want to reset to initial
parameters
Language
Deutsch
Selection: Deutsch/English
Programmer has to be
disconnected and reconnected
to activate new language.
Mode
Tow release off
Auswahl: On / Off
This is the selection
between operating mode 1 or
2 (see chapter 3.1)
Back
Servotester
Servotest CH1
Generates a servosignal on
CH1
Servotest CH2
Generates a servosignal on