Page 27
3.7.3 The power for the receiver is turned on.
3.7.4 The battery for the motor is connected.
3.7.5 A test of all rudders is performed. Is the movement of the radio control sticks corresponding to
the movement of the rudders?
3.7.6 A radio control range test is performed.
3.7.7 When the 3-way-switch is in the rear position ( -100%) the ORBIS is retracted. Depending on
the operating mode (see chapter 3.1) the ORBIS will be conduct the following steps when the
3-way-switch is operated.
3-way-
switch
Operating Mode 1 ( Tow release off )
Operating Mode 2 ( Tow release on )
Tow release closed.
ORBIS extracts and turns the propellers in
flight direction.
Tow release open.
The motor will start slowly in the
‘Speed
Automatic On’ mode A
In the
‘Speed Automatic Off’ mode B you
can give the throttle signal manually.
ORBIS extracts and turns the propellers in
flight direction. The motor will start slowly
in the
‘Speed Automatic On’ mode A
In the
‘Speed Automatic Off’ mode B you
can give the throttle signal manually.