Preliminary
THCV245A_Rev.0.90_E
Copyright©2020 THine Electronics, Inc.
THine Electronics, Inc.
Security C
30/67
6.16 MIPI Short Packet V-by-One® HS output bridge mode
MIPI SP (Short Packet) can be bridge to V-by-One® HS output with the following schemes.
MIPI Short Packet V-by-One® HS output bridge mode is only supported when “R_BITMAP_SEL=2’b00
(MAP1)” or “R_BITMAP_SEL=2’b11 (MAP4)”.
“R_VS_MODE=1’b0” and “R_FS_FE_SYNCEN=2’b00” setting is required to bridge both MIPI Frame Start
and Frame End Short Packet. “R_VSYNC_POL=1’b0” setting is required to connect THCV242.
THCV236-Q connection is only supported where HFSEL=0 setting is applied on THCV236-Q.
Figure 11.
MIPI Short Packet V-by-One® HS bridge timing
Pixel Clock
Vsync
BYTE0
V
V
BYTE1
H
H
BYTE2
BYTE3
Vsync
BYTE0
V
V
BYTE1
H
H
BYTE2
BYTE3
@R_FS_FE_SYNCEN=00 / R_VS_MODE=0 / R_VSYNC_POL=0
@R_FS_FE_SYNCEN=01 / R_VS_MODE=0 / R_VSYNC_POL=1
SP1
(FS1)
SP2
(FS2)
SP3
(FS3)
SP4
(FS4)
SP1
(FE1)
SP2
(FE2)
SP3
(FE3)
SP4
(FE4)
SP1
(FS1)
SP2
(FS2)
SP3
(FS3)
SP4
(FS4)
SP1
(FE1)
SP2
(FE2)
SP3
(FE3)
SP4
(FE4)
