Thies CLIMA DLx-MET, Instructions For Use Manual

Page: 39 / 56

5.1 DATA OUTPUT MANUALLY
With the manually data output the complete ring memory (mean or extreme) will be given out on
serial port COM1 or on a SD-Card (ref. to chap.
5.2
).
SD-Card:
1. Set the display to
* Data Output
?
2. Push and snap in the SD-Card into the slot of the datalogger.
3. First press <ENTER> and then < ▼ > -button, until
the cursor is flashing.
4. Press < ▼ > - or < ▲ > -button for at least 3 seconds.
5. Select mean or extreme value memory:
X: “M” Mean value: < ▼ >
X: “E” Extreme value: < ▲ >
* Data Output
X-data
6. Start output: Press <ENTER>
7. To cancel or end data output: Press <ENTER>
8. Finish of output: Output „ END “ on display (line 2)
Y: “M” (mean) or “E” (extreme)
ooo: “SD” or “COM1”
NNNNN: number of scanned data
* Data Output
Y ooo: NNNNN END
sssssY00.TXT
records
Line 3: Filename on SD-Card (ssss: station name)
9. Remove the card when the output is ready:
Push the Card until it releases, then pull it out (so called ejector type
Push-In/Push- Out).
39 - 56 021579/06/09