Thies CLIMA DLx-MET, Instructions For Use Manual

Page: 20 / 56

1. STATION NAME:
* Station: THIES
DLx(Met) V1.01a
USB:0 DE
The station name serves to distinguish the data from several stations. The name (here: "THIES")
can comprise up to 5 characters. On the readout, this name is output along with the data via the
serial interface. The instrument type(„DLx(Met)“) and the software version („V1.01a“) are mentioned
in the second line. The third line shows if a USB-connection is detected (USB:1) or not (USB:0) and
the “DE” indicate a German(Deutsch)/English version.
Serial command: “XXn” for input of the station name (ref. to chap.
5.5
)
Language:
When changing the station name (ref. to chap.
3.2.1
) the second line turns to the language
selection for the display output („Language :English“ or „Sprache : Deutsch“); selecting between
both modes is possible, then.
2. DATE / TIME:
*Date: 01.01.08
Time: 13:00:00
Display of date and time of the logger.
Serial commands date: “DD”, “DT”, “DM”, “DJ” (ref. to chap.
5.5
)
Serial commands time: “ZZ”, “ZH”, “ZM”, “ZS” (ref. to chap.
5.5
)
3. DATA OUTPUT:
* Data Output
?
Starting the data output (ref. to chap.
5.1
)
If there is no SD-Card in the slot of the datalogger, the output is carried out automatically via the
serial interface COM1.
Serial commands: “TS”,”ts”,”DS”,”ds”,”TE”,”te”,”DE”,”de”,”SS”,”GS”,”EE” (ref. to chap.
5.5
)
SENSOR MEASURED VALUES:
For display, all measuring values are detected, and updated every second.
General error message (exceeding of measuring range or sensor not connected) is the output of
„???.?“.
If a internal sensor is not configured (switched off) „---.-„ is output.
„M“ as first character of the second line with the sensor measuring values shows the maintenance
operation (see operation mode).
Serial commands: “mm” or “MM” (ref. to chap.
5.5
)
20 - 56 021579/06/09