If there is not enough draught in the chimney, exhaust gases stack in boiler's combustion
chamber or in the chimney with the risk of explosion. Also, gas flow into the boiler's room can
happened.
Always check the exhaust gas temperature. Directly after the boiler it should be between 160°C
and 250°C.
Too high a temperature can damage the chimney and is not economical.
Too low a temperature, a very high chimney, or a large chimney diameter creates a risk for
condensation that can cause corrosion and damage due to freezing.
6.
Controller
6.1.
General description
Description:
Diodes signalizing the status of outputs and the working mode of the driver,
LCD screen used for communication between the device and the user,
Buttons steering the driver's work.
6.2.
Description of buttons
Button
Function
1
Changes the burner's working mode –
“STOP”, “IGNITION”, “AUTOMATIC
WORK”.
2
Return to the previous menu
1
Entry on the Menu's parameters
2
Saves the change of a parameter