TECHNICAL FEATURES AND DIMENSIONS
4
2.
TECHNICAL FEATURES AND DIMENSIONS
2.1.
Technical features
The ECOWOOD boiler series is designed for function on any type of solid fuel: wood, agricultural
residues, carbon, briquettes, with a minimum diameter of 20mm. The boiler is equipped with
two doors: one upper for fuel loading and a lower door for ash removal. There is also an inner
door for access to the heat exchanger.
ECOWOOD STANDARD is equipped with a thermometer and chain thermostat regulator.
ECOWOOD PLUS version is equipped with a modulating fan and a digital controller. The boiler
can also control the heating pump and the hot water pump, as well as being connected with an
exhaust gas temperature sensor for full fan modulation and maximum fuel savings.
ECOWOOD boiler is designed to operate in economy mode, providing a constant heating of
houses or small industrial premises.
The boiler is made of steel, ideal material for thermal fluctuations, resistant to expansion and
contraction. Monobloc construction, with no other welded structures is an advantage of
ECOWOOD boiler. Also this boiler is protected against thermal shock.
ECOWOOD boiler is designed so that all surfaces that are in contact with the flame are cooled
by water, including the grate where the ash and combustion residues fall. The two roads flue at
the top, the large number of flue pipes, large volume of the furnace and boiler water as well,
and symmetrical construction causes a high yield.
DESCIPTION OF COMPONENTS
Steel boiler body with cylindrical heat exchanger
Removable rear smoke box with inspection cleaning door
Upper door for ignition, fuel loading and cleaning access
Lower door for ash removal
Ash box positioned on the lower part of the fire chamber
Combustion fan positioned on the lower door (PLUS version)
Chain thermostat regulator and air door positioned on the lower door (STANDARD version)
Glasswool body insulation of 50 mm thickness
Electrostatically painted external covers
Control panel for electromechanical operation (PLUS version)
2.2.
Function principle
The function of the ECOWOOD boiler is based on
exhaust gas evacuation through the chimney. The fuel
is positioned on the grate. The combustion takes place
in the fire chamber. During the combustion the flame
comes in contact with the side walls of the fire
chamber, which are surrounded by water. The fire
chamber is of big volume in order to receive big
dimension logs and to ensure a long autonomy.
The combustion air is supplied by the fan and
distributed through an air distributor, positioned below
the fuel grate. The combustion is regulated through the
fan, controlled by the control panel.
The exhaust gases are guided through the heat
exchanger to the smoke box, and afterwards evacuated
to the chimney. The smoke box is equipped with an
inspection and cleaning door, which also actions as an
explosion relief.
The doors have an insulation cord to ensure air-tight
closing. Each door is equipped with a handle, which
must always be well tightened during the combustion.
Fig 2.
Boiler function
