ThermoSpas Atlantis Gold, Owner'S Manual

Page: 21 / 68

15
Proper Procedure for Adding Chemicals
Proper water chemistry is essential to the safety of the user as well to the life of the spa compo-
nents. Improper water chemistry may cause skin irritation or facilitate the transmittal of disease.
Proper water chemistry is the sole responsibility of the spa owner. The costs incurred from injury
or damage resulting from improper water chemistry are not covered under the ThermoSpas, Inc.
warranty.
1. Turn on jets pump(s) when adding chemicals to ensure proper mixing and leave your spa
cover open until the sanitizer level becomes stable to protect pillows and plastic knobs from
chemical attack.
2. Do not add chemicals through the skimmer.
3. Only add one chemical at a time. Unless otherwise specified always wait at least 10 minutes
after adding chemicals to your spa before adding more chemicals.
Note: Depending on the metals or mineral content of your tap water, one of the chemicals in
the treatment may react to cause a discoloration or formation of a precipitate. In this event you
should not have to drain your spa. There are treatments to solve this problem. If you have any
questions contact Customer Care.
WARNING: BECAUSE OF THE RISK OF INHALING CHEMICAL VAPORS.
• To decrease the risk of injury, drowning or entrapment, never leave your hot tub un-
attended for any reason while the cover is open and accessible, especially to small
children and animals!
• Precautions should be taken to minimize your exposure to chemical vapors (that
could cause lung, brain, or skin damage).
!
Spa Start Up