ThermoSpas Atlantis Gold, Owner'S Manual

Page: 27 / 68

21
Jets Pump 3 to 5 (If equipped)
Models equipped with Jets pump 3, 4 or 5 use a 1-speed pump. Each of these pumps
will have an auxiliary pump control panel, Figure 4. To operate:
1. Press Jets pump ( ) button once to turn the pump on. The pump icon will
move faster to indicate high speed, Figure 5.
Note: Pumps time out and turn off after 15 minutes. You can press the Jets pump but-
ton again to reactive the pump.
2. Press Jets pump ( ) button a second time to turn the pump off.
3. Refer to “Automatic Functions” (page 28), for automated pump functions.
Wave Lounge Pump and Valve Control (Park Ave Diamond
models)
The wave lounge offers a unique massaging experience. The jets system
located throughout the lounge move the massaging action from your neck
down to your feet. To operate the wave lounge:
1. Press Wave Lounge Pump ( ) button once to activate the high speed pump on and off.
Note: The pump will automatically turn off after 15 minutes.
2. Press Wave Lounge Start/Stop ( ) button to activate a sequencing wave massaging
action. The wave massaging action will begin at the neck and shoulders and work its way
down to the feet. To stop the massage action on one specific area, just push the start/stop
button. To resume the massaging action, push the button again.
Blower (Gold, Platinum and Diamond Models)
The blower activates all blower air jets, Figure 6. The blower introduces air into
the air jets for a bubbling affect.
1. Press Blower ( ) button once to turn on. The blower icon will display on the
LCD screen, Figure 7.
Note: The Blower will automatically turn off after 15 minutes. You can press the blower
button again to reactive the blower.
2. Press Blower ( ) button a second time to turn off. The blower icon will
disappear from the LCD screen.
3. Refer to “Automatic Functions” (page 28), for automated blower functions.
Control Valves
Several components have dedicated valves that give you more control over their function.
The operation of each valve is described below.
1. Blower Control Valve (Figure 8)
Controls the intensity of the air blower on spas equipped with a bubbling system.
Simply turn the valve to increase and decrease the amount of air introduced to the
air jets.
2. Pillow Jet Control Valve (Figure 9)
Controls the water intensity flow to the pillow jets. Turn the valve clockwise to
decrease the intensity; counterclockwise to increase the intensity.
3. Therapy Control Valve (Figure 10)
Controls the water to air ratio to vary the intensity of the jet.
Pump
Figure 4
Figure 5
Wave
Lounge
Pump
Wave
Lounge
Start/Stop
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
Operating Instructions