ThermoSpas Atlantis Gold, Owner'S Manual

Page: 24 / 68

18
Topside Control Panel
Main Control Panel
Button Functions:
Time Button: Use to set the time and when pressed the Liquid Crystal Display
(LCD) screen will display the time.
Mode/Prog Button: Use to switch modes between Standard, Economy, Standard-
in-Economy or Sleep mode.
Warm Button: Press continuously to increase water temperature, one degree at a
time.
Cool Button: Press continuously to decrease water temperature, one degree at a
time.
Light Button: Turns light(s) on and off. By continually pressing the button on and
off, you can cycle through the various colors programmed into the LED controller
(Blue/Green, Purple, Blue, Green/Red, Green, Red and other effects).
Blower Button: Turns the blower on or off. Feature is not available on the Silver
Package.
Pump 1 Button: Press once to turn Pump 1 on low speed; a second time for high
speed; a third time to turn off.
Pump 2 Button: Press once to turn Pump 2 on; press again to turn off.
LCD Display Icons:
Heat Icon: When the bars alternate between the top and bottom bar, the spa is
measuring the water temperature. When the bars progress from bottom to top, the
spa water is being heated. When this feature is active, the heat icon will appear on
the LCD display.
Note: Temperature range is from 80° to 104°F (26° to 40°C).
Light Icon: When the underwater light, pillows lights and grab bar light (if
equipped) are turned on, the light icon will appear on the LCD display.
Blower Icon: When the blower is on the icon will appear on the LCD screen.
Pump Icon: When a pump is activated the icon will appear on the LCD screen. For
a 2-speed pump the icon will move slowly to indicate low speed and moves faster
to indicate high speed.
Ozone Icon: When the ozone is on (if equipped), this icon will appear on the LCD
display.
Time
F1
F2
TL
PL
Warm
Mode/Prog Cool
Light Blower
Pump 1 Pump 2
102
Designed to Improve Your Life
O³
Topside Control Panel