thermopatch.com
17
7. Press the ENTER button until the display reads “PATTERN MARKER: “. Use the UP or
DOWN ARROW button to select YES.
8. Press the MENU button to exit the menu.
9. Loosen the clamp screw, move the transfer sensor onto the space between the transfer
images and tighten the clamp screw.
10. Press the TRANSLUCENT button and hold it until the lights on the sensor stop blinking.
NOTE:
If green and red output lights are on and an * is displayed on the control box,
push both (normal) and (translucent) buttons simultaneously. This procedure inverts the
output to the correct status, green light on.
