thermopatch.com
12
Step 3
Refer to Figure 5
Attach the air filter/regulator, with fittings to the bulkhead fitting, Item A, on the back of
the machine. Orient as shown with the gauge facing forward. Connect the air supply to the
male hose adaptor, Item C.
Step 4
Refer to Figure 6. This is the Electrical Enclosure Assembly, found on the right side of your
machine
Connect the foot pedal plug into the FOOTSWITCH Plug, Item A.
Connect the power line cord to power entry module, Item B, and to the power outlet. Turn
on the machine by pressing the on/off switch, Item D.
Item C depicts the display cable plugged in, previously discussed in connection on page 11.
