ThermoFLUX Pelling 100, User And Maintenance Manual

Page: 22 / 50

PELLING
22
In the case that function STAND BY is not activated ( OFF ), and that connection for
the room thermostat is not overbridged, boiler will always work in power 1 no matter
which power is set.
In the case that function STAND BY is not activated ( OFF ), and connection for room
thermostat is overbridged (set in the factory) boiler will work in the power chosen by
the user, and when desired temperature is reached will go into modulation mode.
Boiler will shut down only if the temperature in the boiler is 80 degrees C, and will
start again when temperature drops down below desired temperature.
4.3.4.2 STAND BY mode with room thermostat connected
A. FUNCTION STAND-BY SET ON– room thermostat shuts down boiler
When room thermostat sends signal that desired temperature in the room is reached
(contact is open/temperature is reached) boiler will shut down after 2 minute (factory
settings- in the case that temperature in the room changes all to prevent constant
turning on and off of the boiler) on display is written tOFF-WAITING REQUEST.
When room thermostat gives signal that room temperature is low (contact closed/
temperature needs to be reached) boiler will start ignition and on display is written
tON.
Remark: Boiler functioning primarily depends on temperature of the water inside of
boiler and factory settings inserted. If boiler is in state of WAITING COOLING (water
temperature is reached), eventual request of the thermometer will be ignored.
B. FUNCTION STAND-BY SET OFF – room thermostat gives signal to the
boiler to work in POWER 1
In the case that function STAND BY is not activated ( OFF ) boiler will work in power
chosen by the user and when desired temperature is reached boiler will modulate (will
not shut down but working power will change to lowest).
Boiler will shut down only if temperature of the water in the system is 80 degrees C,
and on display is written WAITING COOLING . Boiler will start again when
temperature in the system drops down below set temperature.
Option Buzzer
B
UZZER
is used in the case that user want to hear sound signal from the boiler
in the case of activated alarm (set ON ), or without sound signal (set OFF ).
Option BUZZER is activated by pressing of button SET , and after that with
buttons 5 or 6 we choose item MENU 05- OPTION BUZZER.
By pressing of the button SET choice ON or OFF is opened (with buttons 1 or 2
we are selecting option and confirmation is done by pressing SET ).