![background image](http://html1.mh-extra.com/html/thermofisher-scientific/devicelink-connect/devicelink-connect_configuration-and-installation-instruction-manual_1105626013.webp)
DeviceLink Connect
Getting Started | 9
•
Supply power to your DeviceLink Connect mote by connecting the provided PoE ethernet cable to the “Out” port on the
PoE wall adapter and the PoE LAN port on the back of the mote. Plug the PoE wall adapter into standard wall outlet.
Figure 2. Connecting Supply power to DeviceLink Connect mote
•
Install any additional independent sensors desired (See
Installing Independent Sensors
section for added instructions).
•
Install provided USB Commissioner dongle into any 1 of the 4 USB ports on the DeviceLink Connect.
Figure 3. Installing USB Commissioner dongle to DeviceLink Connect mote
Note:
If you have 4x sensor plugged into the DeviceLink Connect, unplug one of the sensors and insert the USB
commissioner dongle. You can re-insert your USB sensor after Step 3 is complete and you remove the USB commissioner
dongle.