![background image](http://html1.mh-extra.com/html/thermofisher-scientific/840-287100/840-287100_manual_1105620057.webp)
Installing the Nicolet iN5 Microscope
This document contains confidential or proprietary informat ion of Thermo Fisher Sc ientific. Ne ither this document nor
the information therein is to be reproduced, distributed, used or disclosed, either in whole o r in part, e xcept as
specifically authorized by Thermo Fisher Scientific.
1/4/2018
Page 57 of 84
d. Assess the camera rotation.
Assess the levelness of the scale in the
Microview.
Scale tilted Scale le vel
i.
If the scale is level continue with step 41.
ii.
If the scale is not level (tilted) complete step 40e and then continue
with step 41.
e.
Use a 3mm balldriver to loosen the camera mount setscrew (circled below)
and then rotate the camera mount as necessary to level the scale as
observed in Microview. When the scale is level, secure the setscrew.
Note
Ensure the setscrew is loosened enough so the entire camera mount
can rotate. Rotate by grasping the camera or the camera mount below the
camera focus ring; the camera focus ring does
not
lock and is free-floating.
Camera focus ring
(does not lock)
Grasp at camera or
below camera focus
ring to rotate entire
camera assembly to
level calibration
scale