Installing the Nicolet iN5 Microscope
This document contains confidential or proprietary informat ion of Thermo Fisher Sc ientific. Ne ither this document nor
the information therein is to be reproduced, distributed, used or disclosed, either in whole o r in part, e xcept as
specifically authorized by Thermo Fisher Scientific.
1/4/2018
Page 6 of 84
f. Remove the white foam block from the top of the iN5 and set aside.
g. Carefully lift the iN5 from the lower tray and set on a flat, sturdy surface.
h. Remove the plastic bag from the iN5.
5. Prepare the iN5 for installation.
a. Carefully remove the blue tape from the stage assembly and discard.
Then move the Z stage up slightly, remove the white foam or bubble wrap
from the stage assembly and discard.