![background image](http://html1.mh-extra.com/html/thermofisher-scientific/840-287100/840-287100_manual_1105620010.webp)
Installing the Nicolet iN5 Microscope
This document contains confidential or proprietary informat ion of Thermo Fisher Sc ientific. Ne ither this document nor
the information therein is to be reproduced, distributed, used or disclosed, either in whole o r in part, e xcept as
specifically authorized by Thermo Fisher Scientific.
1/4/2018
Page 10 of 84
7. Unpack the iN5 interface bracket and connect to the iS10.
a. Remove the interface bracket with screws from the plastic bag.
b. Remove the tape from the arm of the bracket to release the bag of 4-
mounting screws; ensure that the locator pin does not stick to the tape.
Remove the tape from the left locator pin ensuring that the pin does not stick
to the tape. If so, reinsert [the flat side] of the pin(s) into the hole(s).
c. Carefully open the bag of mounting screws and set the screws aside.
d. Place the interface next to the right-side of the iS10.
Align the channel in
the interface to the locator pin under the iS10 baseplate at approximate
center.