Installing the Nicolet iN5 Microscope
This document contains confidential or proprietary informat ion of Thermo Fisher Sc ientific. Ne ither this document nor
the information therein is to be reproduced, distributed, used or disclosed, either in whole o r in part, e xcept as
specifically authorized by Thermo Fisher Scientific.
1/4/2018
Page 7 of 84
b. Remove the blue tape from the binoc/trinocular dovemount shown
below and the blue tape and red cap from purge extension tube (not
shown) and discard.
c. Check the iN5 for damage. If damage is apparent, stop here and contact
the factory otherwise continue with step 5d.
d. Set the iN5 on the tabletop approximately 3 feet from the right-side of
the spectrometer.
e. Discard all packing materials.
6. Prepare the Nicolet iS10. If you do not have an iS10, continue with step 8.
a. Release the Smart-Omni sample accessory by turning the latch at the
top-back of the assembly approximately 45
°
counter clock-wise.
Locked Unlocked