Thermo Spectronic BioMate 3 Service Manual Download Page 4 | Manualshive

Page: 4 / 180

background image

NEW PRODUCT WARRANTY

Thermo Electron Corporation instrumentation and related accessories are warranted against defects in
material and workmanship for a period of one (1) year from the date of delivery. This warranty is provided
only if the warranty registration card is returned to Thermo Electron Corporation within fifteen (15) days
after delivery.

This warranty covers parts (except those specified below) and labor, and applies only to equipment which
has been installed and operated in accordance with the operator's reference guide and which has been
serviced only by authorized Thermo Electron Corporation dealers or service personnel. This warranty
does not apply to equipment and accessories that have been modified or tampered with in any way,
misused, or damaged by accident, neglect, or conditions beyond Thermo Electron Corporation’s control.

This warranty does not apply to lamps, glassware, and similar expendable components. However, their
manufacturer may warrant such parts and components.

Thermo Electron Corporation is not responsible under this warranty for loss in operating performance due
to environmental conditions.

THIS WARRANTY IS IN LIEU OF ALL WARRANTIES EXPRESSED, IMPLIED, OR STATUTORY,
INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR
MERCHANTABILITY OR OTHERWISE, and states Thermo Electron Corporation’s entire and exclusive
liability and the Customer’s exclusive remedy for any claim in connection with the sale or furnishing of
services, goods, or parts, their design, suitability for use, installation, or operations. Thermo Electron
Corporation will in no event be liable for any direct, indirect, special, or consequential damages,
whatsoever, including loss of goodwill, whether grounded in tort (including negligence), strict liability or
contract, and Thermo Electron Corporation’s liability under no circumstances will exceed the contract
price for the goods and/or services for which liability is claimed.

UPDATE POLICY

Thermo Electron Corporation may, from time to time, revise the performance of its products, and in doing
so incur no obligation to furnish any such revisions to any Thermo Electron Corporation customer.

SOFTWARE PASSWORD

This password allows you to enter the security section of the software used on your spectrophotometer.
Through the security section, you can “lock” test setups (test parameters) so that they may not be altered.
The password also allows you to remove the security so that you may edit the test parameters. Please
refer to the appropriate section in your Operator’s manual for more information on locking a test.

PASSWORD: 4 3 6 3 7 9 7

iv

«
...
2
3
4
5
6
...
»

Summary of Contents for Spectronic BioMate 3





















































































































































































Reviews:

No comments

Related manuals for Spectronic BioMate 3

Brand: QALCOMET Pages: 52

Brand: G-Tek Pages: 83

Brand: Yamaha Pages: 14

Disklavier Mark II XG Series

Brand: Yamaha Pages: 12

Brand: Samsara Pages: 16

Arrow Mobile Android

Brand: MADDALENA Pages: 12

Brand: FASAR ELETTRONICA Pages: 2

Brand: Velleman Pages: 38

Brand: Rebel Pages: 28

Intelligizer Fence Monitor

Brand: Zareba Pages: 8

Brand: Laser Technology Pages: 80

Brand: Milkotester Pages: 44

Brand: Hanna Instruments Pages: 2

Brand: dacell Pages: 29

Brand: VOLTCRAFT Pages: 4

Brand: Hanna Instruments Pages: 2

Brand: Campbell Pages: 42

Brand: Purafil Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands