9 Configuring programs
03/2007
38
DA0621_a/
9 Configuring
programs
As delivered by the factory, each control panel program key (18) is pre-set with
one program each. Depending on which programs are present, the microprocessor
control may offer additional programs. Authorized operators can use the key-
operated switch to change the configuration of the programs permanently within
the technical limits of the unit and to reprogram program keys.
INFORMATION
The sterilizer is protected from inadvertent changes in
configuration by a key-operated switch (17).
Remove the key from the key-operated switch while the
sterilizer is in operation.
Carefully store the key in a safe place.
INFORMATION
The program key P
3
is solely designed for activating the
Liquids sterilization program.
Authorized operators can thus define individually configured programs for the
program keys P
1
or P
2
.
Ö
Starting configuration
♦
Insert the key into the key-operated switch (17).
Ö
Reprogramming a program key
♦
Select the one of the both program keys (18) P
1
or P
2
for which you wish
to choose an individual program.
♦
Turn the key-operated switch (17) to the configuration position (“Konfig.”).
Each time the selected program key is pressed, the cycle display shows the
available parameters for the sterilization process:
•
Program
•
Sterilizing
temperature
•
Sterilizing
time
•
Drying time (option)
•
Vacuum
(option)
•
Removal
•
Multiple sterilization number (option)
•
Batch
number
