Thermo Scientific ULT-80 Installation & Operation Manual Download Page 21

Page: 21 / 62

Má tá aon treoir ann nach dtuigtear

, ceadaigh an lámhleabhar nó déan teagmháil linn sula dtéann tú

níos faide.

Sábháilteacht, gach táirge:

DANGER

léiríonn sé staid ghuaiseach as a leanfaidh bás nó tromghortú, mura seachnaítear í.

ARNING

léiríonn sé staid ghuaiseach, a bhféadfadh bás nó tromghortú a bheith ina thoradh

air

, mura seachnaítear í.

CAUTION

léiríonn sé staid ghuaiseach, as a leanfaidh mionghortú nó dochar measartha, mura

seachnaítear í. Úsáidtear é, leis, chun rabhadh a thabhairt i gcás cleachtais neamhshábháilte.

ceaptha leis an úsáideoir a chur

ar an eolas maidir le “voltas contúirteac

h” neamhinslithe laistigh

d’imfhálú an fhuaraitheora.

Tá an voltas suntasach a dhóthain le bheith ina bhaol turrainge leictrí.

léiríonn sé d

romchlaí te.

léiríonn sé g

ur chóir an lámhleabhar a léamh.

Ná húsáid an trealamh mar ghléas steiriúil nó mar ghléas a nasctar le hothar

. Lena chois sin, níor ceapadh

an trealamh lena úsáid i Láithreacha Guaiseacha

Aicme I, II nó III mar a shainmhínítear sa Chód Náisiúnta

Leictreach.

Ná cuir an folcadán in áit nó in atmaisféar ina bhfuil teas iomarcach, taise, nó ábhair chreimneacha.

Ceadaigh lámhleabhar an úsáideora go bhfeice tú na paraiméadair oibríochtúla.

Ceangail an trealamh d’asraon atá talmhaithe i gceart.

Níl an cosantóir ciorcaid atá suite ar chúl an fholcadáin ceaptha le gníomhú mar mhodh dícheangail.

Ná hoibrigh an t-athfhillteoir ach amháin leis an corda líne soláthraithe. Má úsáidtear corda cumhachta an

athfhillteora mar ghléas dícheangail, ní mór teacht a bheith air i gcónaí.

Cinntigh nach mbíonn aon teagmháil idir na cordaí leictreacha agus aon cheann de na naisc nó an

feadánra pluiméireachta.

Ná cuir voltas líne i bhfeidhm ar aon cheann de naisc chumarsáide an fholcadáin.

Cinntigh go ndéantar gach nasc leictreach, agus más cuí, gach nasc cumarsáide sula dtosaítear

Is airde ná aer na cuisneáin a úsáidtear

, agus má bhíonn sceitheadh ann, gabhfaidh siad áit na hocsaigine

as a leanfaidh cailliúint comhfheasa. Dófar craiceann i gcás teagmháil idir craiceann agus sceitheadh

cuisneáin. Féach ainmphláta an dáileora go bhfeice tú an cineál cuisneáin a úsáidtear agus ansin féach

Leathanach Sonraí Sábháilteachta SA

is déanaí an déantóra, an rud a dtugtaí an MSDS air cheana, agus

Leathanach Sonraí Sábháilteachta

AE chun breis eolais a fháil.

Ná hoibrigh an folcadán riamh gan leacht a bheith sa taiscumar

Fairsingíonn leachtanna ola-bhunaithe tar éis iad a théamh. Seachain nach rólíontar an taiscumar

Ná húsáid ach na leachtanna ceadaithe atá liostaithe sa lámhleabhar

. Cuirtear an baránta ar neamhní má

úsáidtear leachtanna eile. Ná húsáid gliocól 100% riamh.

Treoracha Riachtanacha Sábháilteachta

Folcadáin Saotharlainne

Is gá íonuisce a chur le meascáin uisce/gliocóil, nó méadóidh céatadán an ghliocóil as a leanfaidh

ardslaodacht agus drochfheidhmíocht.

Sula n-úsáidtear aon leacht ceadaithe seachas uisce, nó nuair a bhíonn cothabháil á déanamh nuair is

dócha go mbeadh teagmháil leis an leacht, ceadaigh SDS agus Leathanach Sonraí Sábháilteachta

AE an

déantóra go bhfeice tú na réamhchúraimí láimhsithe.

Cinntigh nach féidir leis an leacht aon gháis thocsaineacha a ghiniúint. Is féidir le gáis inadhainte cruinniú

os cionn an leachta fad a bhíonn sé in úsáid.

Agus gliocóil eitiléine agus uisce á n-úsáid, seiceáil tiúchan an leachta agus an pH ar bhonn rialta. Is féidir

le hathruithe ar thiúchan agus ar pH difear a dhéanamh d’fheidhmíocht an chórais.

Ní mór an teocht oibre is airde, mar a shainmhínítear in EN 61010 (IEC 1010), a bheith teoranta ag 25°C

faoi bhun phointe dóiteáin an leachta folcadáin.

Cinntigh go bhfuil an leacht ag teocht sábháilte (faoi bhun 40°C) sula láimhseálann nó sula ndraenálann tú é.

Ná hoibrigh riamh le trealamh damáistithe nó trealamh atá ag sceitheadh, ná le haon chorda damáistithe.

Ná hoibrigh an folcadán riamh gan leacht a bheith sa taiscumar

. Ná hoibrigh an folcadán agus ná cuir

leacht leis an taiscumar fad a bhíonn na painéil bainte. Ná glan an folcadán le tuaslagóir

, úsáid ceirt bhog

agus uisce.

Draenáil an taiscumar sula ndéantar é a iompar

, agus/nó a stóráil gar don reophointe nó faoina bhun.

Cas an folcadán as i gcónaí agus dícheangail an voltas soláthair óna fhoinse cumhachta sula mbogtar an

folcadán nó sula ndéantar aon seirbhísiú nó obair chothabhála. Iarr ar theicneoir cáilithe gach seirbhísiú

agus deisiú a dhéanamh.

Iompar an folcadán go cúramach. Is féidir le croitheadh nó ísliú tobann na comhpháirteanna a dhamáistiú.

Is é an t-úsáideoir a bheidh freagrach as dí-éilliú má dhoirtear ábhair ghuaiseacha. Ceadaigh an déantóir

maidir le dí-éilliú agus nó oiriúnacht oibreán glantacháin.

Níor chóir ach do dhéileálaí cáilithe, a úsáideann trealamh deimhnithe, an gléas a dhíchoimisiúnú. Ní mór

cloí le gach rialachán atá i bhfeidhm.

Féadfaidh staid ghuaiseach agus cur ar neamhní bharánta an déantóra a bheith ina thoradh ar fheidhmiú

na nósanna imeachta suiteála, oibriúcháin nó cothabhála seachas iad siúd a ndéantar cur síos orthu sa

lámhleabhar

Ar mhaithe le taisteal, teanntaítear spriongaí tacaíochta na gcomhbhrúiteoirí roimh sheoladh. Ní mór na

spriongaí (ceithre cinn i ngach

comhbhrúiteoir) a scaoileadh sula n-oibrítear an t-athfhillteoir

. Bain na

painéil cúil agus taoibh chun teacht a fháil ar na comhbhrúiteoirí agus na spriongaí.

Ba chóir slaodacht de 50 ceinteastóc nó níos lú a bheith ag an leacht fuaraithe roghnaithe ag an teocht

oibriúcháin is ísle. Úsáid leacht nach reonn agus an trealamh á oibriú faoi bhun +8°C agat.

Cinntigh go bhfuil plocóidí ionraoin/asraoin suiteáilte mura bhfuil tú ag athfhilleadh chuig córas seachtrach.

Chun damáiste a sheachaint, ná rótheann an cnoba coigeartaithe srutha UL

T 80 sa staid oscailte ná sa

staid dúnta.

Le hAthfhillteoirí Folcadáin T

eochta Ísle a shuiteáil:

Tá na naisc ionraoin/asraoin suite ar an taobh deas den bhosca rialaithe. Is píobáin chruach dhosmálta

fiaclacha 3/8" O.D. iad na naisc seo, agus glacann siad le feadánra 3/8" or 5/16" I.D.. Ceangail an

t-ionraon caidéil le hasraon an chórais sheachtraigh. Ceangail an t-asraon caidéil le hionraon an chórais

inmheánaigh.Cinntigh go bhfuil na plocóidí suiteáilte ar an ionraon/asraon mura bhfuil tú ag athfhilleadh

chuig córas seachtrach.

Summary of Contents for ULT-80































































Search results

Summary of Contents for ULT-80

Reviews:

Related manuals for ULT-80

Brands by name

Popular brands

Thermo Scientific ULT-80, Installation & Operation Manual

Search results

Summary of Contents for ULT-80

Reviews:

Related manuals for ULT-80

Brands by name

Popular brands