Thermo Scientific SRD-3200, Operating Instructions Manual

Page: 29 / 64

UltiMate 3000 Series:
SRD-3x00 Solvent Racks
Operating Instructions Page 23
4 Preparation for Operation (Startup)
4.1 Overview
After you have unpacked, positioned, and connected the SRD described in sections 3.1
through 3.4 ( → page 17 and following pages), prepare the SRD for operation:
1. Connect drain tubing ( → section 4.2).
2. Connect the solvent reservoirs, and then connect the solvent supply lines to the
degassing channels ( → page 24).
3. Select one of the following alternatives:
• To operate the SRD with the pump of the UltiMate 3000 System
Connect the pump to the degassing channels ( → page 27).
• Standalone Operation
Connect the degassing channels as required by your application.
4.2 Connecting Drain Tubing
To discharge liquid leaks that might have accumulated in the interior, the SRD has a drain
port at the bottom right of the instrument.
Fig. 6: Drain port
Direct liquid leaks to waste through the drain system of the UltiMate 3000 system. The
required components are shipped with the UltiMate 3000 pumps, NCS-3500RS and NCP-
3200RS, but can be ordered also separately. The drain kit (part no. 6040.0005) includes all
required components and detailed installation instructions.