Thermo Scientific SRD-3200, Operating Instructions Manual

Page: 24 / 64

UltiMate 3000 Series:
SRD-3x00 Solvent Racks
Page 18 Operating Instructions
Important: To prevent the device from falling, grasp the device by the sides,
and then lift the unit together with the foam spacers out of the
shipping container. Do not lift the device by the foam spacers or
the front panel.
Important: Afin d'empêcher l'instrument de tomber, saisissez-la par les côtés.
Ne soulevez l'instrument à l’aide du matériau d'emballage ou par la
porte du panneau avant.
3. Remove the foam spacers, and then remove the polythene packaging.
4. Before connecting the SRD to the power source, wait approximately four hours to
allow the instrument to come to room temperature and to allow any condensation that
might have occurred during shipping to evaporate. After four hours, check the SRD; if
condensation still exists, allow the instrument to continue to warm up (without
connecting it to the power source) until the condensation is completely gone.