Thermo Scientific Precision GP 02, User Manual

Page: 43 / 68

2-2 | Precision Thermo Scientific
Chapter 2
| General Information
General Purpose Water Bath Specifications
GP 02 GP 2S GP 05 GP 10
Reservoir Fluid Control
Temperature
°C
°F
Ambient to 90
Ambient to 194
Ambient to 100
Ambient to 212
Set Point Temperature
Range °C
°F
+5 to 100
+9 to 212
Ambient Temperature
°C
Range °F
+15 to 45
+59 to 113
Stability
@ 37°C ±0.1
Uniformity @ 37°C ±0.2
Heating Output
watts 200 300 300 800
Bath Volume
liters 2 2 5 10
Overall Bath Dimensions
(L x W x H) cm
inches
23.0 x 19.9 x 23.3
9.1 x 7.8 x 9.2
24.6 x 35.5 x 23.2
9.7 x 14.0 x 9.1
24.6 x 35.5 x 23.2
9.7 x 14.0 x 9.1
39.3 x 38.3 x 23.3
15.5 x 15.1 x 9.2
Bath Work Area
Dimensions
(L x W x H) cm
inches
13.8 x 15.5 x 15.0
5.4 x 6.1 x 5.9
15.3 x 30.0 x 6.5
6.0 x 11.8 x 2.6
15.4 x 30.0 x 15.0
6.1 x 11.8 x 5.9
30.1 x 33.0 x 15.0
11.9 x 13.0 x 5.9
Approximate Weight
kg
lb
3.5
7
4
9 4.5
10
7.5
16
Electrical
Requirements (VAC/Hz)
(Voltage ±10%)
100-115/50-60
or
200-230/50-60
Compliance
CE RoHS
UL WEEE
Maximum Relative
Humidity
(Non Condensing)
80% for temperatures up to 31°C (88°F)
decreasing linearly to 50% relative humidity at 40°C (104°F)
Operating Altitude meters
feet
Sea Level to 2000
Sea Level to 6560
Overvoltage Category II
Pollution Degree 2
Storage Temperature
°C
Range °F
-25 to +60
-13 to +140
Low-end reservoir fluid control temperatures require supplemental cooling.
Specifications obtained at sea level using water.
Thermal beads may be used instead of water but they will degrade the bath's uniformity and stability.
Bath depth includes bezel, height does not include lid.
Thermo Fisher Scientific takes no responsibility for damages caused by the selection of an unapproved fluids.
Thermo Fisher Scientific reserves the right to change specifications without notice.